Large Biomass Pellet Machine
The wood pellet machine adopts a large modulus hard toothed helical gearbox, strengthened spindle, strong power output, equipment stable operation, low failure rate, low production cost. Wood pellet machine suitable for: eucalyptus, pine, birch, poplar, fruit, crop straw, bamboo chips, rice husk, waste wood plate, etc The finished pellets is biomass energy as biofuel, which can replace coal, oil, gas, etc., widely used in power plant, boiler, and heating system.
| PRODUCT MODEL MOLD | |||||
| MODEL | YIELD(T) | POWER(KW) | MOLDAPERTURESIZE(MM) | PACKAGE SIZE (MM) |
WEIGHT(T) |
| GZLH-560 | 1-1.5T | 9OKW | 4-12MM | 2620*1640*1770 | 5.2 |
| GZLH-560A | 1.5-2T | 132KW | 4-12MM | 2680*1560*1770 | 5.6 |
| GZLH-700 | 2-2.5T | 160KW | 4-12MM | 2560*1380*2020 | 7.2 |
| GZLH-860A | 3-4T | 250KW | 4-12MM | 3150*1550*2240 | 9.5 |
Raw Material
Key Points
1. The mold is laid flat and directly fed, with wide range of material adaptability and strong heat dissipation.
2. Double-layer vertical mold, improve utilization rate, reduce cost, the highest cost performance.
3. The special reducer for pellet machine adopts parallel axis helical gear meshing, good meshing property, stable transmission, small vibration, small noise, large degree of gear fitting, which reduces the load of each pair of gears and improves the bearing capacity of the gears.
4. The unique separation design of the spindle ensures the concentric of the equipment and reduces the failure rate of the equipment.
5. No need to stop the machine, the whole machine can realize 24 hours automatic intermittent lubrication, extend the life of the wearing parts of the equipment.
6. The combination of axial eccentricity and extrusion pressure ensures the shaping degree and smoothness of particles and increases the output.
7. Gear oil is used for bearing lubrication in the bearing room, which can effectively reduce users’ lubrication oil consumption.
PRODUCT STRUCTURE
Customer visit
FAQ
1.What is your minimum order quantity, can you send me samples?
Our minimum quantity is 1 set, as our product is machinery equipment, it’s difficult to send you samples, however,we can send you catalog, warmly welcome you to come visit our company
2.What is the delivery time of your machine?
In general, the delivery time of our machine is about 30 days, customized machine will be delivered as the negotiation with our clients.
3.Can the machine be customized as our need, such as put on our logo?
Surely our machine can be customized as your need, Put on your logo is also available.
4.About the after-sale service, how can you solve the problems occurred of your overseas customer in time?
The warranty of our machine is normally 12 months, during this period, we will arrange the international express immediately, to make sure the replace parts to be delivered as soon as possible.
5.After we placing an order, will you arrange the installation of the machine at present?
All the machines will be tested well before delivered, so almost of them can be used directly, also our machine are easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be charged by you.
6.What service can we provide?
We have 24hrs on line technical service The delivery service around the world And on site technical service for the full set crushers Accepted Delivery Terms: FOB；FCA,CIF,CFR Accepted Payment Currency:RMB or US dollar, etc; Accepted Payment Type: T/T,LC Language Spoken:Accept all
CONTACT US